MOVEX ME75
LEV ARM
Extractor for laboratory environments
With its optimal design, the Ø 75 mm Movex ME has a very low-pressure drop, which provides many valuable benefits.
• Low-pressure drop saves energy.
• Air flow noise is reduced.
• Lower pressure drop is achieved without selecting a larger diameter extractor.
• Lower pressure drop allows the ME to be combined with additional extraction systems.
Unique design and stable mounting brackets make the Movex ME your best.
ALWAYS CHOOSE A LOW-PRESSURE DROP OPTIMAL CAPTURE
The lowest possible pressure drop is a quality aspect that always should be considered. With its uniquely designed joint construction, Movex ME combines maximum flexibility with low-pressure drop. The air passes through the joints without creating unnecessary turbulence, thus producing an energy-saving low-pressure drop
and a quieter working environment.
For optimum benefit from the local extractor, it is important to use the flexibility of the extractor to get as close to the contaminant as possible. A good rule of thumb would be a distance of 2–3 times the diameter of the extractor tube. At the recommended air flow, the extractor will provide high efficiency even if disturbances are generated in the surroundings.
ONE ARM.
ALL OPTIONS.
-
STANDARD ARMS
-
Suitable for evacuating most types of airborne contaminants, e.g. in laboratories, schools, hospitals, the pharmaceutical industry, nail
salons and light industrial applications.
-
-
PP VERSION ARMS
-
Used primarily for evacuating very corrosive contaminants in high concentrations, e.g. in certain laboratories and in the pharmaceutical and chemical industries
-
-
ESD VERSION ARMS
-
Suitable for evacuating airborne contaminants in environments where there is a need to avoid the risk of spark formation and in areas where products need to be ESD-certified, e.g. the electronics industry.
-
-
ATEX VERSION ARMS
-
Suitable for evacuating airborne contaminants where there is a requirement for an ATEXclassified environment, e.g. in laboratories, the chemical and petrochemical industries, gas distribution, and the paint and pharmaceutical industries.
-